Propane Tank Policies
The gas container, liquefied petroleum system or LP system is a collective term by OSHA which refers to the piping, regulators, hoses, regulators, fittings and valves. Depending on the capacity of the tank, the agency requires particular components. These individual components should undergo standard laboratory testing. The right laboratory approval would prove that the system components meet pressure, thickness and construction standards.
Tank Location
The organization OSHA determines how near the propane tank can be mounted in relation to buildings, to ignitable materials, to tanks which contain inflammable liquids, welders and cutting torches. These strict rules are in place to make the jobsite really safe for the workers and those others who are in the vicinity.
Nameplate Marks
LP systems require that the name, the address, the supplier of the container, and or the tanks brand name, be marked on the propane container. The capacity of the container is to be listed with the following details: pounds or gallons of fuel, square foot outside surface, pressure and fill level. Additionally, information regarding whether or not the container is made to be installed above ground or underground is also visible. These markings need to be on a metal plate connected to the container somewhere visible. OSHA requires that each tank must be marked by the National Board of Boiler and Pressure Vessel Inspectors so as to be considered ready and safe to utilize.
Tank Repairs and Modifications
OSHA also regulates any type of repairs to the LP systems, such as welding. The personnel performing repairs and the tank owners must understand the standards and regulatory codes which the tanks were manufactured. Welding repairs to any system component which is subject to internal pressure has to first follow these fabrication codes. Any other type of welding is only allowed on brakctes, saddle plates or lugs.
The OSHA works hard to ensure that people who work with lift trucks and in their vicinity are kept safe. They have stringent rules and training procedures in place so as to make sure that these industrial equipment and their repair processes are handled as safe as possible and with respect. It is essential that businesses follow their rules and steep fines could happen if they are not adhered to.