Change a Propane Tank
Forklifts powered by propane are common inside warehouse settings. These forklifts have a propane mount located behind the operator. These tanks have to be replaced every so often as they have limited lifespans. Operators of forklifts should utilize caution when handling propane tanks. Compressed gases are hazardous, particularly because the gas is flammable. Always use care when replacing and removing propane tank to prevent being injured.
1 If there is a need to replace the propane tank, the first step is to stop the forklift, then turn the tank valve off. The forklift should be left on until the engine dies. This process burns off the gas inside the transfer hose which connects the tank and the engine. Prior to taking the second steps, put on the correct safety equipment, such as insulated gloves made of either neoprene or leather. It is vital for you to protect your skin from contact with the compressed gas, which is very cold.
2 Disconnect the hose from the tank and take off the holding straps to remove the tank. When putting in a new tank, reconnect the holding straps and reconnect the hose at the valve of the tank by tightening the nut.
3 You could inspect for leaks by applying soapy water to the valve and slightly opening it. Leaking gas will cause bubbles to foam around the value. If this happens, inspect the connection hose at the nut and the valve area. The connecting nut must be re-tightened if you detect any leaks in the valve area, and afterward do the leak checking process once more. Persistent leaks mean that the nut and connecting hose must be replaced. Nevertheless, if replacing the hose and nut still does not stop the leak, the tank must be replaced.
4 Lastly, open the valve all the way to allow the gas to fill the connecting hose. Afterward you could start the forklift and resume working.